Husqvarna 545 Mark II Vs. 460 Rancher: In-depth Differences

Husqvarna 545 Mark II comes with the latest AutoTune ™ technology to ensure automatic engine adjustment and minimal air filter clogging. In contrast, Husqvarna 460 Rancher has Narrow kerf technology to boost the cutting speed of the chainsaw.

Which chainsaw brand comes to mind regarding high functionality and rugged, heavy-duty?

Surely, Husqvarna! But, the manufacturing company offers dozens of models. Here, we develop a comparison session between Husqvarna 545 Mark II and 460 Rancher.

A Quick Comparison Table

SpecificationsHusqvarna 545 Mark IIHusqvarna 460 Rancher
Special Technologylatest AutoTune ™ technologyNarrow kerf technology
Bar Length20 inch24 inch
Cylinder Displacement3.06 cubic inch3.68 cubic inch
Maximum Power Speed9,900 rpm9,000 rpm
Idling Speed2,800 rpm2,700 rpm
Torque Maximum2.95 Nm3.4 Nm
Fuel Consumption2.6 lbs/h2.56 lbs/h
Oil Pump TypeAdjustable flow, no flow at idleAutomatic
Sound Level106 to 116 dB(A)104 to 114 dB(A)
Vibration Level3.6 m/s² for front handle and 4.1 m/s² for rear handle3.8 m/s² for front handle and 6.9 m/s² for rear handle
PriceSlightly HigherLess expensive

Key Differences Between Husqvarna 545 Mark II And 460 Rancher

  • Special Technology
Husqvarna 545 Mark II Chainsaw
Husqvarna 545 Mark II Chainsaw

Husqvarna 545 Mark II has the latest AutoTune ™ technology to ensure automatic engine adjustment.

You are less likely to experience air filter clogging issues. Also, it eliminates imbalanced humidity fluctuation.

Contradictorily, Husqvarna 460 Rancher is equipped with Narrow kerf technology to boost the cutting speed of the chainsaw.

Its narrower cutting face and slim cutter profile design make it less resistant to cutting. The unit can remove less wood, so you can better control how much to cut in a particular area.

  • Bar Length

Do you prefer a smaller or longer bar length?

Husqvarna 545 Mark II has a 20-inch bar, making it perfect for cutting small and midsize trees. It is easier and safer too.

But you can use the unit for trimming, pruning, and property maintenance jobs.

In opposition, Husqvarna 460 Rancher comes with a 24-inch bar. It is perfect for heavy-duty tasks. You can use it for various jobs in your home and farm, such as storm clean-up and cutting large or firewood trees.

But it is a little complicated to operate due to its heavier weight. You may have fatigue issues from several continuous hours of work.

  • Cylinder Displacement

Husqvarna 545 Mark II has 3.06 cubic inches of Cylinder Displacement, whereas Husqvarna 460 Rancher comes with 3.68 cubic inches of Cylinder Displacement.

Higher displacement means more additional power generation. Hence, 545 Mark II can create more power. Due to the more considerable bar length, Husqvarna 545 Mark II requires a little more power to cut trees.

However, both units have an X-Torq® engine. So, they have a massive amount of torque.

  • Maximum Power Speed
Husqvarna 460 Rancher
Husqvarna 460 Rancher

The maximum power speed of the Husqvarna 545 Mark II is 9,900 rpm, whereas Husqvarna 460 Rancher can reach up to 9,000 rpm speed.

Due to the shorter bar length but similar motor power, Husqvarna 545 Mark II can cut wood more quickly.

But you must be wondering why right?

Remember, one long cut is slower than two smaller cuts. When you use smaller chainsaws, they engage less wood. So, minimal resistance, friction, and drag are created to maintain a faster chain speed. 

  • Idling Speed

A chainsaw has an average of 2,300 to 2,500 rpm idle speed. Husqvarna 545 Mark II comes with 2,800 rpm idling speed, but Husqvarna 460 Rancher has a 2,700 rpm.

It may appear only a 100 rpm difference. But a slightly higher superior speed will result in higher fuel consumption.

This will cause additional wear and tear for the engine. You are likely to struggle to cold start occasionally. Husqvarna 460 Rancher appears slightly more efficient because it allows you to run the engine without stalling.

  • Torque Maximum

Husqvarna 545 Mark II has a 2.95 Nm maximum torque, whereas Husqvarna 460 Rancher can generate up to 3.4 Nm torque. Higher torque means rapid chainsaw acceleration.

Rancher is slightly larger and heavier than Mark II. Hence, it requires more power to achieve the same cutting speed.

Both have sufficient torque and rotational power to maintain the perfect cutting speed. You will not see any blunting issues in both chainsaws. Even cutting tough items appears worry-free.

  • Fuel Consumption

A fuel tank chainsaw will run continuously for 20 to 40 minutes, depending on many factors. Husqvarna 545 Mark II will consume 2.6 lbs of fuel per hour.

In contrast, Husqvarna 460 Rancher has a 2.56 lbs fuel consumption rating under normal conditions.

As mentioned earlier, a lower idling speed and large cylinder displacement consume a little less fuel than the other option. This makes the unit more eco-friendly. If you calculate the saving for the whole year, it will be a noticeable amount.

  • Oil Pump Type
Husqvarna 460 Rancher
Husqvarna 460 Rancher

Do you know what the best advantage of the Husqvarna 545 Mark II is?

It features an adjustable oil pump.

Controlling the oil flow in various weather conditions and situations seems easygoing.

You can customize the oil pressure based on your needs.

Conversely, Husqvarna 460 Rancher has an oil-pumping system.

The device can automatically deliver oil to the chain and bar of the chainsaw. You don’t need to pump the system manually. But, adjusting the oil flow speed is not possible. This option is better when you handle the same type of tasks regularly.

  • Sound Level

The average noise level of a chainsaw can be between 100 to 106 dB (A). The noise level of Husqvarna 545 Mark II ranges from 106 to 116 dB (A), depending on the items you cut.

On the contrary, Husqvarna 460 Rancher has a 104 to 114 dB (A) sound level. But, the difference is minimal. And both are convenient to operate as they are only producing natural sounds.

  • Vibration

Husqvarna 460 Rancher generates slightly more vibration than Husqvarna 545 Mark II with its front and rear handles. Its longer bar length and overall larger size cause additional vibration.

However, it is still not too much to harm your engine.  You need just a few time operations to get used to it.

But, if your hands are sensitive to vibration, it may create circulatory problems due to numbness.

  • Price

Husqvarna 545 Mark II is slightly more expensive than Husqvarna 460 Rancher due to its easy-to-use operation and handy features.

For example, the Rancher chainsaw has an auto-tuning system. So you don’t need to waste time adjusting the carburetor. It features a Snap-lock cylinder cover to replace spark plugs quickly. The cleaning task will be simple too.

Which Chainsaw Model Is Better For You?

Though both brands are from the same brand, they are suitable for different tasks. If you usually handle more giant trees and have decent chainsaw skill, Husqvarna 460 Rancher is a perfect choice.

It generates more cutting speed and consumes less fuel. More importantly, the cutting device is less expensive.

But, if you only handle small and medium-sized trees and don’t mind spending a few dollars extra, Husqvarna 545 Mark II is a better choice.

Frequently Asked Questions  (FAQ)

Is a Husqvarna 545 a pro saw?

You can use Husqvarna 545 for professional forestry and tree care crews to cut small and medium-sized trees.

Is a 545 Mark II a pro saw?

Husqvarna 545 Mark II is perfect for felling, limbing, and bucking any small and medium-sized trees.

Is the Husqvarna 545 good?

Husqvarna 545 has sufficient chain speed and enough torque power to cut items as large as 25-inch.

Is the 460 Rancher a pro saw?

Husqvarna 460 Rancher is a mainly a Prosumer-grade saw that is a reliable choice for faster cutting.

Final Thoughts

So, which option have you decided to choose between Husqvarna 545 Mark II and 460 Rancher? Both options are good but it requires you consider all features to get the best bang.

Husqvarna 545 Mark II is a better choice if you are a beginner in tree cutting. But Husqvarna 460 Rancher is ideal for skilled workers.

Ralph Wade

Hey...Ralph is here! So, did you find this article useful? If so, please leave a comment and let me know. If not, please tell me how I can improve this article. Your feedback is always appreciated. Take love :)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Recent Posts