Echo CS-590 is a pretty famous chainsaw amongst woodworkers. That’s primarily because of its high-quality performance that serves your purpose of wood cutting.
However, with the Echo CS-590 problems, you must be considerate because most of the issues stop the chainsaw from working altogether.
Luckily, I am here to help you out with that. Because here, I will be taking you through all the problems associated with the Echo CS-590 and trying to give solutions for them as well.
So, if you are struggling with any of the issues below, this article may help you immensely.
Problems With The Echo CS-590 Chainsaw
Most of the problems you will encounter with Echo CS-590 will lead to a total halt of the chainsaw. This means your chainsaw will stop working altogether. There are several causes for that to happen. Below you will see the reasons, so let’s get going.
- The Engine Gets Flooded A Lot
A lot of the time, when using the chainsaw, it can flood the engine. This mainly happens because of fuel overpricing.
Whenever you keep the choke open for a long time, the fuel will flood your engine somehow.
A flooded engine will have lower oxygen levels which hamper the ignition process of the engine.
So, when the engine can’t go through the ignition process, it will not even start. As a result, your chainsaw won’t even start working.
- Dirty Carburetor
A dirty carburetor can be another cause of making your chainsaw stop ultimately. The gasoline breakdown on the engine is pretty quick.
As the gasoline breaks down inside the engine, you will have difficulty dealing with the carburetor, and it will get dirty sooner than you would think.
I don’t think I have to tell you what happens when the carburetor gets jammed. You will struggle with starting the chainsaw engine. A result of that is your chainsaw won’t even work at all.
- Starter Assembly Can Quickly Get Damaged
The starter assembly on the Echo CS-590 isn’t the strongest out there. Because of that, it can easily get damaged over time. When this happens, the recoil starter will fail to give any input. This will lead to the engine not working correctly, and you know what happens next. Yes, the chainsaw doesn’t start up at all.
This can be a bothersome issue because you will have difficulty figuring out the solution. Also, it’s hard to determine this problem without troubleshooting.
- Difficulty In The Correct Fuel-To-Oil Ratio
Finding the correct fuel-to-oil ratio on the Echo CS-590 can be tricky. Yes, you can check up on the manual and get the numbers. But they won’t be enough at times.
Maintaining the correct ratio becomes tricky at times. So, you will have to go through this process several times and find the correct ratio.
- Pull Rope Damages
The pull rope you have on the Echo CS-590 chainsaw isn’t the best for durability.
It can easily get damaged, and you can’t even get it fixed that easily. The damages mostly occur when you use the pull rope a bit roughly.
Now, the thing is, you can’t truly use the pull rope without being a bit rough on it.
So, it’s a problem when the pull rope gets damaged this easily.
- It Gets Jammed In Cold Weather
One of the most problematic issues with this chainsaw is for people living in colder regions. The chainsaw tends to stop working when the weather gets a bit cold.
You will have a lot of trouble starting up the chainsaw because it’s completely jammed due to cold weather.
In the colder regions, the chainsaw engine can’t get hot enough. That’s why it’s a problem you will have to face with the chainsaw.
Usually, these are the most common issues you encounter when you have an Echo CS-590 chainsaw. I mean, these issues can get your chainsaw to a complete stop.
So, you can’t even ignore or avoid these problems either, and you will have to try solutions for them. Let’s get through that part very quickly now.
Solutions To Try Out For The Problems With Echo CS-590
When you compare ECHO CS-590 with Stihl MS 261 chainsaw, it’s good! So, many people got it already.
Here, you will find some solutions that are very easy to follow up with. Then some solutions are a bit difficult to proceed with. Either way, it’s good to know about the solutions, so you can try them out to fix the problems.
- Cleaning Up The Carburetor
Cleaning up the carburetor of your chainsaw engine fixes up two of the issues I talked about above. First, it unfloods the engine and makes the engine work properly. Secondly, you, of course, clean up the dirty carburetor.
When you clean the carburetor, you can make enough room for oxygen inside the carburetor and the engine. To clean it up, you can read the instruction manual you get with the Echo CS-590.
- Replacing The Starter Assembly
If you ever find the starter assembly damaged, you have no choice but to replace it. There is no way to fix the starter assembly by yourself.
You may opt for repairing it from a professional mechanic, but for the most, it doesn’t work out that well. So, the only solution is to replace the assembly altogether.
- Proper Fuel-To-Oil Ratio
The first thing you have to do to fix this issue is referred back to the manual. Make sure you are using the exact manual for the model of your chainsaw.
Start with the recommended ratio in the manual. If you find issues with it, make small adjustments and find out which value works best. This way, you can find out the correct ratio and keep note of that.
- Pull Rope Replacement
Well, when the pull rope for starting up the chainsaw engine gets broken or worn out, you can’t do anything about it. The only solution you have is to replace the pull rope. You can easily find replacements and fix the problem.
As you can see, most of the fixes here are about replacing the damaged parts. You can barely find any fixes that you can try out yourself.
Frequently Asked Questions (FAQ)
Your Echo chainsaw may start cutting out when the spark arrestor gets clogged with soot.
You can try flipping the chainsaw upside down when dealing with a flooded Echo CS590 chainsaw. Then, pull the rope and try starting it about 10 to 12 times.
The Echo CS 590 has a horsepower of 4.
You have to start the engine using the starter handle. Then, you must push the choke control in the chainsaw. Lastly, pulling the starter cord one last time should get you done.
Conclusion
To conclude, there are surely some Echo CS-590 problems. But with the solutions, you don’t have to worry too much about them. Most of the solutions you get to see are just replacements of parts. So, you are sure to get the fixes to the problem.
Apart from these problems, you don’t have to worry too much about the chainsaw. It’s a pretty good chainsaw that comes with good power and performance.
