Pros And Cons Of Superior Walls: Is It Worth It?

Are you looking for a quick way to finish your construction with precast concrete walls? If that’s the case then, you may have come across superior walls.

I don’t think I need to go through all the discussions about why precast concrete walls are better. But you must be wondering about the pros and cons of superior walls over other choices.

That’s where I step in. Here, I will take you through a complete look at the advantages and drawbacks associated with superior walls compared to other precast options. Let’s get going with it then.

The Advantages And Disadvantages Of Superior Walls

Here’s the thing, not everyone has a lot of time on their hands to go through the whole article. So, if you are one of them, you can quickly check out this table of pros and cons regarding the superior walls.

Still, I would recommend going through the whole thing if you have time to get a better idea of the choice.

ProsCons
It’s a cost-effective solutionThe inside walls are unfinished
Saves up a lot of timeThey can’t withstand a lot of pressure
Running electrical and plumbing lines is easyThe height of these walls is limited to 20 feet
The walls have proper insulation without requiring any vapor barrier 
These walls don’t weigh too much 
Provides you the choice of finishing the exterior with your preferred material or product 
A lot of professional builders recommend them 

Yes, you get the basic idea of superior walls, but I don’t think it’s enough to understand the whole picture. So, let’s dig a little deep and see the actual value of the superior walls, and then you can decide whether it’s worthwhile or not.

The Advantages Of Superior Walls

Pros And Cons Of Superior Walls

First, let’s discuss the advantages that you get from the superior walls. I will go through each of them one by one.

.And remember, I am judging these advantages compared to other kinds of precast wall choices. So, it gets clear why you should consider this over the other ones.

  • The Cost Is Quite Low On This

When you start looking into superior walls, it’s not that much to worry about. You can get superior walls for building your project without spending a whole lot of money.

That’s where the beauty of these walls comes in. While they make your project much easier to complete, they don’t cost too much either. So, it’s kind of a win-win situation for you.

  • It’s Much More Efficient

Since you won’t be spending hours pouring and curing concrete walls on-site, you can save up a lot of time. They are pretty much ready-made walls that you can just get for your project and start applying.

The whole purpose of doing this is to save time with the quick installation feature you get from superior walls.

  • You Can Easily Run Plumbing And Electricity Lines

Usually, these walls are unfinished, and because of that, you can easily run your plumbing and electricity lines through the walls. With this feature, it’s much more convenient for you to install these walls without worrying too much about the electricity and plumbing.

However, the unfinished walls also have issues that I will discuss later. So, it’s just the fact of benefit over drawbacks in this case.

  • The Walls Are Quite Lightweight

Well, the weight of these walls is pretty low compared to other choices. Now, that helps in a lot of cases.

First, it makes handling the walls at the installation time very easy. Along with that, it also makes them easy to carry around.

However, the best part of less weight on these walls is the transportation cost. You don’t have to pay a lot for the transportation cost on this one. This helps you save up on unnecessary costs.

  • You Can Flip The Wall To Suit Your Needs

The ability to flip the wall makes it suitable for you to adjust the exterior with your preferred material. You can customize the wall with any kind of product to decorate the outer part of your superior wall.

This is good freedom to get on the walls to make sure you can style it the way you want.

Altogether, these walls have quite a lot of pros to them. You can surely get a lot of value out of these without any questions.

But before you go ahead and make your decision, let’s get through some of the disadvantages.

Disadvantages Of Superior Walls

Superior Walls Problems

There aren’t a lot of drawbacks to these walls; still, you can get some that can bother you from time to time. Let’s get through those very quickly –

  • The Walls Are Unfinished

While this benefits running electricity and plumbing lines, it also has some issues with its durability. Since there are empty spaces, they also leave out some fragile points on the interior wall.

Because of that, you can’t truly rely on the durability factor of these walls.

This means they can easily break around those places. And there is no way to finish those areas either. So, if you are not using the walls properly, you just end up with hollow spaces on the walls that can easily break.

  • They Aren’t Capable Of Handling Too Much Pressure

These walls can’t hold up against a lot of pressure. You can only expect these to withstand around 7500lbs of pressure per linear foot.

In comparison, there are some choices out there that can hold up well against a lot more pressure than this one.

  • The Height Is Limited

In terms of verticality, you may have some problems with the walls. The height of the walls is limited to 20 feet which can be an issue for some people.

Because when you need walls taller than that, you just have to go with other options or attach multiple superior walls to get the height.

Overall, I think it comes down to what you prefer to get on your walls. Whether these walls suit your project or not is the core question you have to ask yourself. As a solution, I would say these are well worth a try.

Frequently Asked Questions (FAQ)

Now, let’s get through some common questions regarding the superior walls –

Why are superior walls better than conventional choices?

Superior walls are some precast concrete walls that are made in a controlled environment. Because of that, you don’t have to go with the traditional pour-in method for creating concrete walls. Due to that controlled environment, you also end up with better quality walls.

How do you join superior wall panels?

Usually, the walls will be bolted together at each panel’s bottom and top part. Then, you will need to use a sealant to seal the joints of the panel to make the foundation system.

Do the superior walls come with a warranty?

Yes, they have a limited warranty. The warranty only works with any defect in the workmanship and the core materials. Also, if they have any water penetration issues, the warranty covers that.

Do these walls come in different sizes?

Yes, there are multiple sizes available for the walls that you can choose from. While they are not free size, most of the standard wall panel sizes are available for this one.

Conclusion

If I had to sum up these pros and cons of superior walls, then I would say, it’s a great option to go with. You won’t have too much mess on your working site and you can save up a lot of time.

Compared to other precast solutions, this is a very cost-effective one to go with as well.

Ralph Wade

Hey...Ralph is here! So, did you find this article useful? If so, please leave a comment and let me know. If not, please tell me how I can improve this article. Your feedback is always appreciated. Take love :)

2 thoughts on “Pros And Cons Of Superior Walls: Is It Worth It?

  1. I am getting ready to build a home and am a little confused about the benefits of using Superior walls.

    My biggest concern is the failure rate after 10 years. I understand that proper installation is a significant factor. My house will be small ( a little under 1800 sq ft) and only one floor. How can I tell if my build plan exceeds the 7500 lbs per linear ft.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Recent Posts