Deprecated: mb_convert_encoding(): Handling HTML entities via mbstring is deprecated; use htmlspecialchars, htmlentities, or mb_encode_numericentity/mb_decode_numericentity instead in /home/helloarm/ralphsway.com/wp-content/themes/acabado2/functions.php on line 2160
Hey, you! If you’re into 3D printing, you need to grab Kingroon PLA filament. It’s a game-changer—affordable, reliable, and precise, it’s perfect for hobbyists and pros alike.
From functional parts to vibrant toys, this filament delivers clean, strong prints without breaking the bank.
Trust me, I’ve tested it, and it’s a must-have for your next project. Stick with me as I share my experience, break down the pros and cons, and compare it to other brands—you’ll see why Kingroon is worth every penny!
My Experience With Kingroon PLA Filament
I’ve been 3D printing for a few years now, churning out everything from prototypes to Etsy-bound toys, and let me tell you, Kingroon PLA filament has earned a permanent spot in my workshop.
I first stumbled across it during a bulk deal—10 kilograms for a price that made me double-check my cart.
I was skeptical; cheap filament often means brittle prints or endless clogs, but Kingroon surprised me.
I loaded up my Bambu Lab X1C with a spool of black PLA and fired up a functional part—a gear mechanism that needed to be rigid and precise.
The filament fed smoothly, no hiccups, no jams. The print came out crisp, with tight tolerances that clicked together without any sanding.
I was impressed by how stiff it was; there’s no flex here, which was perfect for my project but a mental note for anything needing elasticity. Next, I tried a batch of colorful PLA for some toy figures.
The colors weren’t as glossy as I’d hoped—more satin than shiny—but they still popped, especially under good lighting. I ran these through my A1 Mini and Qidi Plus-4, using generic PLA settings, and the adhesion was spot-on, with no stringing to fuss over.
What stood out was the consistency. Across multiple printers and projects, the filament performed like a champ. The 1 kg spools lasted through marathon print sessions, and the spooling was decent—not perfect, but no tangles or binds, even with my AMS unit.
I’ve burned through a few rolls now, and while I haven’t stress-tested it scientifically, the prints feel durable, with layers that stick like they mean it. For the price, it’s hard to complain. Kingroon’s PLA isn’t flashy, but it’s a workhorse that gets the job done, whether you’re prototyping or crafting something to sell.
Pros of Kingroon PLA Filament
- Exceptional Dimensional Accuracy: Let’s talk precision. Kingroon’s PLA boasts a dimensional accuracy of +/- 0.02 mm, and it shows. When I printed parts that needed to fit together—like a snap-on case for a gadget—the tolerances were spot-on. No gaps, no wobble. This kind of consistency is a godsend for functional prints where every millimeter counts. It’s like the filament knows exactly what you need and delivers without fuss.
- Clog-Free and Easy to Use: I’ve had my share of filament nightmares—clogs that make you want to chuck your printer out the window. Not with Kingroon. This stuff is dried for 24 hours before packaging, and it feeds like a dream. Whether I’m using a direct drive or Bowden setup, it extrudes evenly, with no bubbles or jams. It’s forgiving, too; even with my less-than-perfect slicer settings, I got clean prints every time.
- Wide Printer Compatibility: You’ve got a Creality, a Prusa, or maybe a Bambu like me? No worries—Kingroon’s 1.75 mm PLA works with pretty much any FDM printer. I tested it across five different machines, from budget to high-end, and it performed consistently. That universality is a huge plus, especially if you’re running a mixed fleet or upgrading your setup.
- Great Value for Money: Let’s be real: 3D printing can get pricey, especially if you’re burning through filament like I do. Kingroon’s PLA is a steal. I snagged a 10 kg bundle for around $100, and the quality rivals brands twice the price. It’s not just cheap; it’s reliable, making it ideal for bulk projects like prototyping or cranking out Etsy orders. You’re getting professional-grade results without the premium price tag.
- Strong and Rigid Prints: If you need parts that hold up, Kingroon’s PLA delivers. The prints are stiff and sturdy, with excellent layer adhesion. I printed a bracket for a shelf, and it’s been holding weight for months without a crack. This toughness is perfect for functional parts, though it’s less ideal for anything needing flexibility. For rigid, durable projects, it’s a winner.
- Decent Color Range: While not the glossiest, Kingroon’s color palette is solid. From bold reds to subtle blues, there’s enough variety to keep your projects lively. I used their yellow for some toy cars, and while it leaned more matte than vibrant, it still looked great after a quick polish. It’s versatile enough for both decorative and practical prints.
Not-So-Good Parts of Kingroon PLA Filament
- Matte Finish Lacks Shine: If you’re after that glossy, eye-catching finish, Kingroon’s PLA might disappoint. The colors are solid but lean toward a satin or matte look, especially on faster printers like my Bambu X1C. For functional parts, this isn’t a dealbreaker, but for display pieces, you might need to paint or polish to get that wow factor. Slower printers might coax out a bit more shine, but don’t expect miracles.
- Limited Flexibility: This filament is rigid—really rigid. That’s great for gears or brackets, but if your project needs a bit of give, like a flexible phone case, look elsewhere. I tried printing a hinge that needed slight elasticity, and it snapped under pressure. It’s not a flaw, just a trade-off; know your use case before you buy.
- Average Bridging Performance: Bridging—those unsupported spans in a print— isn’t Kingroon’s strong suit. I noticed some sagging on a model with long bridges, though it wasn’t catastrophic. With dialed-in slicer settings, you can mitigate this, but out of the box, it’s middle-of-the-road. If bridging is critical for your projects, you might want to tweak your setup or consider a premium filament.
- Spooling Could Be Better: The spools aren’t always wound as tightly as I’d like. I didn’t have any major tangles, but a couple of times, the filament felt loosely coiled, which could be a hassle with an AMS or high-speed printer. It’s a minor gripe, but for the price, I can’t complain too much—just keep an eye on your spool as it unwinds.
Maintenance Tips For Kingroon PLA Filament
- Store It Right: PLA hates moisture, and Kingroon’s filament is no exception. I keep my spools in airtight containers with desiccant packs when not in use. If you live in a humid area, consider a filament dryer; I dried a spool at 120°F for 7 hours after a stringy print, and it was back to perfect. Proper storage keeps your filament printing smoothly and prevents brittleness.
- Dial In Your Settings: Kingroon’s PLA is forgiving, but you’ll get the best results with the right settings. I stick to 190-215°C for the nozzle and 50-60°C for the bed, adjusting based on my printer’s quirks. Play with retraction settings to minimize stringing—start with 0.5-1 mm and tweak from there. A consistent speed (around 50-60 mm/s) helps with layer adhesion and finish.
- Clean Your Nozzle Regularly: Even clog-free filament like Kingroon’s can leave residue over time. I do a cold pull every few spools to keep my nozzle clear. Heat it to 230°C, poke a needle through, cool to 80°C, and pull the filament out. It’s like flossing for your printer—takes five minutes and saves you from failed prints.
- Check Your Spool Holder: Loose spooling can cause issues, especially with high-speed printers. Make sure your spool holder is stable and the filament feeds without resistance. I printed a quick adapter for my Bambu’s AMS to handle Kingroon’s cardboard spools, and it made a big difference. A smooth feed path is key to consistent prints.
- Monitor Bed Adhesion: Kingroon’s PLA sticks well, but a clean bed is crucial. I wipe my build plate with isopropyl alcohol before each print and re-level every few weeks. If you’re getting lifting, try a brim or increase your bed temp by 5°C. A little glue stick never hurts for tricky prints, either.
Comparison of Kingroon Filament With Other Filament Brands
You’re probably wondering how Kingroon stacks up against other budget-friendly filaments like SUNLU, ELEGOO, Overture, and Inland. I’ve printed with all of them, so let’s break it down head-to-head, focusing on what matters: price, print quality, reliability, and finish.
Here’s the showdown.
- Kingroon Vs. SUNLU: Price and Consistency
SUNLU is a bulk-buy staple, often priced at $9-12 per kg, slightly cheaper than Kingroon’s $10-15.
Both claim +/- 0.02 mm tolerance, but Kingroon feels more consistent.
I printed a batch of toy parts with SUNLU PLA and had occasional clogs, especially if I skipped drying.
Kingroon’s pre-dried filament fed flawlessly across my Bambu X1C and Qidi Plus-4.
SUNLU’s colors vary—some are vibrant, others dull—while Kingroon’s are reliably matte but uniform.
For prototyping marathons, Kingroon’s reliability wins, but SUNLU’s rock-bottom price is tempting if you’re watching every penny.
- Kingroon Vs. ELEGOO: Finish and Versatility
ELEGOO PLA, priced at $10-14 per kg, is a crowd-pleaser with a slightly glossier finish than Kingroon’s satin look.
I used ELEGOO PLA+ for colorful Etsy toys, and the shine popped more than Kingroon’s yellow or red.
However, Kingroon’s dimensional accuracy shines for functional parts—I printed a gear with ELEGOO that was a hair loose compared to Kingroon’s tight fit.
Both are clog-free with generic settings, but ELEGOO’s tighter spooling avoids Kingroon’s occasional loose coils.
If you want vibrant display pieces, ELEGOO’s your pick; for rigid, precise prints, Kingroon takes the crown.
- Kingroon Vs. Overture: Strength and Adhesion
Overture PLA, at $12-16 per kg, boasts strong layer adhesion and a solid color range.
I printed a shelf bracket with Overture, and it held up as well as Kingroon’s, but Overture’s PLA is a touch more flexible, which is great for snap-fit parts but less ideal for rigid gears.
Overture’s bridging is slightly better—I noticed less sagging on a test model—but Kingroon’s adhesion is just as good with a clean bed.
Overture’s spools are neatly wound, unlike Kingroon’s hit-or-miss spooling.
For balanced strength and slight flexibility, Overture edges out; for stiff, budget-friendly prints, Kingroon’s the champ.
- Kingroon Vs. Inland: Reliability and Value
Inland, often $10-13 per kg at Micro Center, is a go-to for budget printers.
It’s reliable, with good adhesion and minimal stringing, but I’ve had more failed prints with Inland due to inconsistent diameter—something Kingroon nails with its +/- 0.02 mm tolerance.
Inland’s colors are decent, leaning glossier than Kingroon’s matte finish, but I found Kingroon’s prints sturdier for functional parts like a tool holder.
Inland’s spools are consistent, avoiding Kingroon’s loose-wind issues.
If you’re near a Micro Center, Inland’s a steal; otherwise, Kingroon’s precision and value make it a better all-around choice.
Kingroon holds its ground in this budget filament face-off. It’s not the shiniest, but its precision, reliability, and price make it a standout for functional prints and bulk projects. If you’re debating, grab a spool of Kingroon and ELEGOO to compare—you’ll likely find Kingroon’s rigidity and consistency hard to beat for the cost.
Frequently Asked Questions (FAQ)
There’s no one-size-fits-all here—it depends on your needs. For budget-friendly reliability, Kingroon and Elegoo are hard to beat, offering consistent prints at $10-15 per kg. Hatchbox shines for vibrant colors and glossy finishes, ideal for display pieces. Polymaker is the premium choice for specialty filaments like TPU or high-detail PLA, but it’s pricey. I lean toward Kingroon for functional parts and Elegoo for toys, as both deliver great value without skimping on quality.
Kingroon’s printers, like the KP3S, are solid for the price—often under $200. They’re compact, with features like direct drive and linear rails that punch above their weight. I’ve heard from buddies who love the KP3S for small, precise prints, though the external power supply and tabletop spool holder can be clunky. They’re great for beginners or hobbyists who don’t mind some tinkering, but if you want plug-and-play, Creality or Bambu Lab might be better.
For strength without an enclosure, PLA+ (like Kingroon’s enhanced PLA) is a top pick. It’s tougher than standard PLA, with great layer adhesion and rigidity, as I’ve seen in my bracket prints. PETG is another strong contender—more flexible and impact-resistant, though it needs careful settings to avoid stringing. Both work well on open-frame printers; I’d give PETG a slight edge for durability, but Kingroon’s PLA+ is plenty strong for most projects.
1.75 mm filament, like Kingroon’s PLA, is the industry standard—compatible with most FDM printers, easier to feed, and widely available. 2.85 mm is less common, used in some older or industrial printers, and can be harder to source. I stick with 1.75 mm for its versatility and smoother extrusion, especially on my Bambu printers. Unless your printer specifically requires 2.85 mm, go with 1.75 mm for convenience and variety.
Conclusion: Kingroon PLA is a Must-Try
You need Kingroon PLA filament in your 3D printing arsenal. It’s affordable, precise, and reliable, making it a no-brainer for functional parts or bulk projects. Whether you’re prototyping or crafting toys, this filament delivers strong, clean prints without the premium price.
I’ve tested it across multiple printers, and it’s become my go-to for everyday printing. Don’t sleep on this budget gem—grab a spool, and you’ll see why Kingroon’s PLA is a crowd-pleaser!